Epicycloid planetary
precision gearbox TANDLER, planetary gearboxes
designed to operate with a minimum backlash, highly dynamic,
manufactured in various versions.
IMS epicycloid gearboxes manufactured
in 8 sizes by the German company IMS and delivered in single
– dual – three-stage versions.
ATEK gearboxes, worm driver with chassis
made in cast iron, worm and shafts are case-hardened and ground
with gear wheels in centrifugally cast bronze.
They are produced in 8 sizes and can be delivered both with a cylindrical flange and square flange for the servo motor mounting and an integrated safety coupling in order to protect the driven machinery (equipment, plant…) against the possible stops and temporary overloads.
TANDLER Planetary epicycloid precision gearboxes
Type: PL2 FS Torque: from 30 Nm up to 810 Nm Reducing ratio: 3 - 1000 Backlash: standard angular <4',
reduced <1' Input speed: n1=4500 min -1 Fields of application:
industrial automation
Type: PSK2 FS Torque: from 30 Nm up to 810 Nm Reducing ratio: 5 - 60 Backlash: standard angular <7',
reduced <3' Input speed: n1=4500 min -1 Fields of application:
industrial automation
IMS Planetary epicycloid precision gearboxes
Type: IMS epicycloid Torque: from 0,20 Nm up to 300 Nm Reducing ratio: 4 - 1140 Lubrication: lifetime Fields of application: industrial automation
ATEK Planetary epicycloid precision gearboxes
Axle base: from 40 mm up to 200 mm
Reduction ratios: from 5 up to 83
Torque: maximum up to 10.500 Nm Input speed: n1=6000 min -1 Angular backlash: standard <6'
At request backlash will be further reduced
With flange for standard motor mountings Axle base:
from 40 mm up to 200 mm Reducing ratios: from 5 up to 83
Torque: maximum up to 10.500 Nm Input speed: n1=6000 min -1 Angular backlash: standard <6'
At request backlash will be further reduced
Motor included Axle base: from 40 mm
up to 200 mm Reduction ratios: from 5 up to 83
Torque: maximum up to 10.500 Nm Input speed: n1=6000 min -1 Angular backlash: standard <6'
At request backlash will be further reduced
With square flange for mounting, motor not included Axle base: from 40 mm
up to 200 mm Reduction ratios: from 5 up to 83
Torque: maximum up to 10.500 Nm Input speed: n1=6000 min -1 Angular backlash: standard <6'
At request backlash will be further reduced
